Back to Top Skip to main content

Army, FDA discuss 3D printing at workshop

When a medical device breaks down on a medical unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away (U.S. Army photo by Francis S. Trachta) When a medical device breaks down on a medical unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away (U.S. Army photo by Francis S. Trachta)

Recommended Content:

Military Hospitals and Clinics | Technology | Combat Support | Medical Logistics

FORT DETRICK, Md. — When a medical device breaks down on a U.S. Army unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away.

Even when parts are readily available, the shipping process – sometimes into hostile environments – could take days or even weeks, if it’s logistically feasible at all.

As the Army embraces advanced manufacturing in its modernization strategies, medical logisticians are looking to 3D printing as a potential solution to this challenge.

"The medical industry is one of the fastest innovators in the defense industrial base, so the AMLC is used to working with industrial partners constantly pushing the state of the art,” said Jack Rosarius, director of Medical Maintenance Management Directorate within the U.S. Army Medical Materiel Agency, a direct reporting unit to Army Medical Logistics Command.

Specifically for medical devices, 3D printing technology – also known as additive manufacturing – may enable the Army to develop repair parts that extend the life cycle of equipment and ensure they are ready for use when and where Soldiers need them.

While the technology offers numerous new uses and potential advantages, it also poses regulatory challenges and warrants safety considerations still under review by the U.S. Food and Drug Administration.

On Dec. 9, 2019, AMLC hosted a military-specific workshop at Fort Detrick with FDA leaders on the topic to seek guidance on current policies, concept regulations and potential stumbling blocks as it explores manufacturing its own repair parts and other 3D-printed items.

Representatives from Army Materiel Command, Air Force and Defense Health Agency also took part in the discussion.

‘Really excited’

USAMMA started piloting additive manufacturing in 2015 in partnership with its equipment program managers. Rosarius said a heightened top-down focus from Army senior leadership has only helped to push the 3D printing movement forward.

“I’m really excited about the opportunities,” said USAMMA Commander Col. Timothy D. Walsh, who also serves as deputy commander of AMLC. “It’s an exciting time to be a part of Army medicine.”

The 3D printing process involves building a three-dimensional object using a computer-aided design model by adding material layer by layer, which is why it’s called additive manufacturing.

The process differs from conventional machining, casting or forging, in which material is removed from a stock item or poured into a mold and shaped to form a product.

Through 3D printing, medical devices can be produced using a range of media, including metals, plastics, hydrogels or even biological materials. Most printing systems do this by dividing or slicing a digital design file in two-dimensional layers, then building each layer on top of the previous layer.

According to the FDA, medical companies began embracing additive manufacturing to create devices that were previously impossible to make, personalized to the patient or both.

‘Gray areas’

While the technology has unlocked new production possibilities, it also has prompted the FDA to explore conceptual regulations to safeguard patients and institute performance requirements.

“The FDA is very focused on what the risk is and how to mitigate it” with 3D-printed medical products, said Matthew A. Di Prima, materials engineer for the agency.

Heather L. Agler, a senior program manager for the FDA, said the technology has created new “gray areas,” specifically when it comes to military production and uses.

Patient safety, however, remains the overarching issue under consideration by federal regulators.

Army’s commitment

During the workshop, AMLC officials gave an overview of the Army’s Advanced Manufacturing Directive and briefed the FDA on efforts to date.

USAMMA has made successful use of 3D printing to produce some obsolete repair parts already, like an impeller for a medical sink or a locking pin for a vaporizer used on an anesthesia machine.

Many more are in various stages of development or design.

“The Advanced Manufacturing Directive demonstrates the Army's commitment to getting this right, so we're positioned for multi-domain operations and large-scale combat operations,” Rosarius said. “The medical maintenance community is excited about expanding the ways we can support patient care downrange.”

Di Prima highlighted different additive manufacturing use-cases, in addition to current agency policy considerations for manufacturers.

The group also worked through different Army-specific scenarios to identify possible snags for ongoing or future efforts, as well as several action items for further discussion.

“We’re happy to participate,” Agler said. “The military is always thinking forward. It’s good to be able to learn … and very important that we continue to work together to make sure you have the right things available when they are needed.”

Disclaimer: Re-published content may be edited for length and clarity. Read original post.

You also may be interested in...

WRAIR develops TeamCORE to support small cohesion

Article
9/17/2020
Group of soldiers in a field

[C]ohesive units meet higher standards, fight better, suffer fewer casualties and manage stress better.

Recommended Content:

Combat Support

Naval Medical Center Portsmouth's iTClamp wins MHS research award

Article
9/11/2020
Image of a plastic clamp on someone's arm

“Hemorrhage control of bleeding is one our biggest problems in military medicine."

Recommended Content:

Research and Innovation | Innovation | Combat Support

Air Force updates medical courses with COVID-19 content, procedures

Article
8/24/2020
Two technicians in full PPE in a lab

COVID-19 has shed new light on the methods of conducting medical training and education.

Recommended Content:

Coronavirus | Health Readiness | Combat Support

DHA proves power of collaboration in medical IT war games

Article
8/18/2020
Men and women in room sitting in front of their laptops

Open-source EHR proves worth in Coalition Warrior Interoperability Exercise

Recommended Content:

Coronavirus | Technology

Air Force updates medical courses with COVID-19 content, procedures

Article
8/7/2020
Two lab technicians wearing full PPE handling vials for testing

COVID-19 has pushed instructors and trainers to be more innovative.

Recommended Content:

Coronavirus | Health Readiness | Combat Support

One Airman’s Life of Service – in and out of uniform

Article
8/5/2020
Man wearing mask checking inventory on shelves

Serving the nation is a way of life for one Airman

Recommended Content:

Armed Forces Medical Examiner System | Combat Support | Total Force Fitness

USS Nimitz certified to administer CCP

Article
7/24/2020
Image of USS Nimitz

Navy carrier crews take care of their shipmates.

Recommended Content:

Convalescent Plasma Collection Program | Coronavirus | Combat Support

Military Medicine Joining Forces to Fight COVID-19 All Around the World

Article
7/17/2020
A group of military personnel posing for a picture

Multiple commands from the Navy and Air Force responded to the request with personnel from all over the country.

Recommended Content:

Coronavirus | Combat Support

Top Military Health Care officials visit Naval Hospital Bremerton

Article
7/17/2020
Place and colleagues learn about Bremerton

"[W]hat’s most important to military health is not headquarters, but where that military health is delivered."

Recommended Content:

Combat Support | Coronavirus

I am Navy Medicine: Lt. Daniel Murrish

Article
7/9/2020
Image of Lt. Daniel Murrish wearing a mask

Murrish was recently selected as NMRTCCP’s Officer of the Year for calendar year 2019.

Recommended Content:

Health Readiness | Combat Support

Combat stress techniques help military providers during COVID pandemic

Article
7/6/2020
Image of soldier in a hazmat suit with a medical-grade mask

6 steps to get medical team members back in the fight

Recommended Content:

Combat Support | Coronavirus

Army & Navy providers team up to save soldier’s life

Article
7/6/2020
Military personnel sitting around a table, exhibiting medical items

ECMO is a heart-lung bypass system that circulates blood through an external artificial lung, oxygenates it, and delivers it back into the bloodstream.

Recommended Content:

Research and Innovation | Technology

Defending the Homeland: BACH Civilian earns RHC-A Civilian of the Year

Article
6/26/2020
Soldier and woman standing by two flags, crossed.

[Guidry] will advance to the U.S. Army’s Medical Command (MEDCOM) Civilian of the Year competition later this year.

Recommended Content:

Coronavirus | Health Readiness | Combat Support

Total Force Airmen: Supporting the DoD – in and out of uniform

Article
6/25/2020
Three soldiers at a desk, two sitting and one standing, pointing at a piece of paper

"The Liberty Wing’s mission: Provide combat-ready Airmen for global engagement"

Recommended Content:

Armed Forces Medical Examiner System | Combat Support | Total Force Fitness

BAMC follows through with redesignation of Army’s WTBs

Article
6/16/2020
Soldier in front of flag speaking into microphone

Brooke Army Medical Center’s WTB made the formal announcement of the pending change on June 3, 2020, with a brief tree dedication ceremony.

Recommended Content:

Military Hospitals and Clinics
<< < 1 2 3 4 5  ... > >> 
Showing results 1 - 15 Page 1 of 23

DHA Address: 7700 Arlington Boulevard | Suite 5101 | Falls Church, VA | 22042-5101

Some documents are presented in Portable Document Format (PDF). A PDF reader is required for viewing. Download a PDF Reader or learn more about PDFs.